Pressure regulators

GAS PRESSURE FILTERS & REGULATORS : HUF/HUP/HUPF

Description:
These are gas Filters (HUF), Gas Pressure Regulators (HUP) and Gas Pressure Regulators with inbuilt filter (HUPF).
Sizes: Upto 2"" are available in threaded version and sizes 2 ½ "" upto 4"" in flange versions. Separate springs are available for various outlet pressures (5-150 mbar)

VALVES AND BUTTERFLY VALVES

COMBUSTION GAS VALVES- VQ 400

Description:
Combination gas valve without pressure regulation, Class ""A"" Combination Gas Valve. For control and regulation of gaseous fluids in gas power burners, ovens, furnaces and other gas consuming appliances. Gas valve type – 2 safety shutoff valves in series Media- natural gas, propane, air.

COMBUSTION GAS VALVES- VR 400

Description:
Combination gas valve with pressure regulation, Class ""A"" Servo Regulated Combination Gas Valve. For control and regulation of gaseous fluids in gas power burners, ovens, furnace and other gas consuming appliances. Gas valve type- 2 safety shutoff valves in series with pressure regulation Media – natural gas, propane, air.

VALVE PROVING SYSTEM- V4021

Description:
V4021 is self-checking microprocessor based valve providing system. This acts prior to firing of the burner. This checks the effective closure of automatic shutoff valves for leakages with the help of pressure switches, in case of leakages this will not allow firing of burners to take place.

FLUID POWER ACTUATOR- V4055/V4062/V9055

Description:
These are special actuators powered by a fluid pump used for on-off or hi-low or modulation Slow opening & fast closingFail safe duty Used to control gas supply or to provide manual reset, safety shutoff functions for commercial & industrial burners Suitable for used with VE5065A/V5055/V5097 Valves

PORT VALVE- V5197A

Description:
The V5197A is an integrated valve train butterfly gas valve. It is a firing rate valve used to provide variable flow control of air, natural gas, Liquefied Petroleum (LP) and manufactured gases The V5197A is actuated by a firing rate motor that can be mounted directly on the valve or can be actuated with Modutrol motors with proper linkages.

BUTTERFLY GAS/AIR VALVE- V51E

Description:
V51E Butterfly gas/air valve provides modulating control of natural, manufactured, LP gases or air, Modutrol Motor can be fitted directly on the valve with proper linkages.

ACTUATORS- Modutrol Motor

Description:
Modutrol IV Motor Provide Following Features Dual Shaft/Nema 3 housing/ Higher holding torques/ Improved spring return holding torque/ reduced power consumption. Add on features available: Diff Voltage models with field addable Transformer Diff strokes, timings and control inputs [on/off, SPDT Floating/ Modulating] Diff torque rating as per application.

ACTUATORS- OM Series Actuator

Description:
The OM series is equipped with standard on-off or modulating (4-20mA, 1-5V, or 0(2)~10V select by DIP-switch) control quarter-turn electric actuator. Torque Range: 35-3500Nm The OM series can also provide feedback output signal: Dry contact for On-Off version; 0~5V, 0~10V,4~20mA(selected by DIP-Switch) for modulating version Auxiliary Switch is optional.

GAS AIR PRESSURE SWITCHES- C6097

Description:
These are safety devices used in positive pressure or differential pressure system to sense gas or air pressure. C6097 Standard Range
1-10 mbar
2.5-50 mbar
30-150 mbar
100-500 mbar

SLOW OPENING GAS VALVES- VE4000C

Description:
Solenoid gas valve, normally closed, with characterized opening, Class 'A' safety shutoff Solenoid Gas Valve with threaded connection and maximum flow rate adjustment and characterized opening For control and regulation of gaseous fluids in gas power burn ovens, furnaces and other gas consumption appliances. Gas valve type – non regulated normally closed, slow opening Media- natural gas, propane, air

NORMALLY OPEN GAS VALVES- VE4000S

Description:
Solenoid gas valve, normally closed, with characterized opening, Class 'A' safety shutoff Solenoid Gas Valve with threaded connection and maximum flow rate adjustment and characterized opening For control and regulation of gaseous fluids in gas power burn ovens, furnaces and other gas consumption appliances. Gas valve type – non regulated normally closed, slow opening Media- natural gas, propane, air

SAFETY SHUTOFF GAS VALVES- VE4000A

Description:
Solenoid gas valve normally open. The VE4000S1 and VE4000S2 series gas valves are safety relief used as vent valves in gas power burners, gas boilers, owens, gas consuming appliances Gas valve type- non regulated ON/OFF normally open Media-natural gas, propane, air VE4000S1- CPI Switch Optional VE4000S2- CPI Switch Mounted

SAFETY SHUTOFF GAS VALVES- VE400AA

Description:
Solenoid gas valve, normally closed, Class ""A"" Safety Shutoff Solenoid Gas Valve with threaded connection. For control and regulation of gaseous fluid in gas power burner, ovens, furnaces and other gas consumption appliances. Gas valve type- non regulated ON/OFF normally closed, fast opening Media- natural gas, propane, air.

SAFETY SHUTOFF GAS VALVES- VE4000B1

Description:
Solenoid gas valve, normally closed, Class ""A"" Safety Shutoff Solenoid Gas Valve with threaded connection. For control and regulation of gaseous fluids in gas power burners, ovens, furnaces and other gas consuming appliances Gas valve type- non regulated ON/OFF normally closed, fast opening Media- natural gas, propane, air.

SAFETY SHUTOFF GAS VALVES- VE4000B3

Description:
Solenoid gas valve, normally closed, Class ""A"" Safety Shutoff Solenoid Gas Valve with flanged connection. For control and regulation of gaseous fluids in gas power burners, ovens, furnaces and other gas consuming appliances Media- natural gas, propane, air.

MANUAL RESET GAS VALVES- VG400AA

Description:
Small manual reset gas valve, normally closed, Class ""A"", manually open, safety shutoff solenoid Gas valve. For use in gas leak detection systems or other applications Gas Valve type- non regulated ON/OFF Media – natural gas, propane, air.

MANUAL RESET GAS VALVES- VG4000A3

Description:
Manual reset gas valve, normally closed, Class ""A"", manually open, Safety Shutoff Solenoid Gas Valve with flange connections. For use in gas leak detection systems or other applications Gas valve type- non regulated ON/OFF Media- Natural gas, propane, air

MANUAL RESET GAS VALVES- VG4000A1

Description:
Manual reset gas valve, normally closed, Class ""A"", Manually open, Safety Shutoff Solenoid Gas Valve. For Use in gas leak detection systems or other appliances Gas valve type- non regulated ON/OFF Media- natural gas, propane, air.

MANUAL RESET GAS VALVES- VG4000S3

Description:
Manual reset gas valve, normally open. Manually opening/closing. Safety Shutoff Solenoid Gas Valve with flange connections For use in gas leak detection systems or other applications Gas valve type – non regulated ON/OFF Media- natural gas, propane, air.

Pressure switches

PRESSURETROL CONTROLLERS- L404

Description:
Provides operating control, automatic or manual reset limit protection for pressure system upto 300 psi. Use with steam, air, non combustible gases or other fluids non corrosive to pressure.

PRESSURETROL CONTROLLERS- L91

Description:
Provides modulating pressure operating controls for regulation of liquid or air and other non corrosive gases Use with steam, air, non combustible gases or other fluids non corrosive to the brass or phos-bronze (300 psi model) bellows Siphon loop included with the models for `0 to 300 psi ranges

PRESSURETROL CONTROLLERS- C437D,E 2000 Series Gas Pressure Switches

Description:
The C437D, E Series 2000 Gas Pressure Switches are pressure actuated switching devices used in industrial gas system applications for safety shutoff, pressure control, and differential pressure control. All Series 2000 models have MicroSwitch™ snap switches to open or close a circuit on pressure rise or drop

FEMA PRESSURE SWITCHES- DCM/DNM

Description:
The universal pressure switch can be used in general mechanical engineering and printing machine industry, pneumatics and hydraulics.Medium: Liquid and Gases Pressure Range: 400mbar-63bar, suitable for SIL 2 according ICE 61508-2

FEMA PRESSURE SWITCHES- EX-DCM/EX-DNM

Description:
The given range of pressure switch is available in explosion proof versions certified for ATEX area classification EEx de IIC T6, PTB approval: PTB 02 ATEX 1121

FEMA PRESSURE SWITCHES- DNS/VNS

Description:
Pressure switches of DNS series are suitable for monitoring and controlling pressures in chemical plants, process engineering and any situation where the pressure of aggressive liquids and gases are to monitored. All components of the sensor system are made of high-quality stainless steel (1.4571) and welded, using latest methods without filler metals. Pressure sensors is gasket-free plasma-welded.

FEMA PRESSURE SWITCHES- DDCM

Description:
FEMA differential pressure monitors are suitable for monitoring and controlling differential pressures, flow monitoring and automatic supervision of filter systems. A double chamber system with stainless steel bellows or Perbunan diaphragm detects the difference between the two applied pressures. The desired switching pressure is adjustable within the ranges mentioned. All differential pressure monitors can be used in vacuum range, hysteresis is not adjustable

FEMA PRESSURE SWITCHES- VCM/VNM

Description:
These pressure switches are used for vacuum applications.Range available from 15mbar to 0.1bar. The zero relevant point on the scale of the unit corresponds to the relevant atmospheric pressure.

FEMA PRESSURE SWITCHES- SMART DCM

Description:
The robust, microprocessor-supported electronic pressure switches in the Smart DCM series measure relative pressures in range from -1 to +1 and 0-40 bar.

GAS AIR PRESSURE SWITCHES- C6097

Description:
These are safety devices used in positive pressure or differential pressure system to sense gas or air pressure. C6097 Standard Range 1-10 mbar 2.5-50 mbar 30-150 mbar 100-500 mbar

Electric flame monitoring and control units

U2 Integrated Flame Detectors

Description:
The U2 all-in-one Viewing head with integrated signal processors delivers flame discrimination in toughest environments. With automatic setup and ability to monitor UV and IR flames simultaneously or separately, the all-in-one flame scanner offers improved burner up time and reliability.
Applications
Industrial process burners
Multiple burner system
Features
Touch screen user interface. Tempered and fully sealed glass touch wheel sensors: no mechanical moving parts. Protection class: NEMA 4x, IP66 Class 1,Div 1/2., IIC, T6 (approved by IECEx and CCoE) Immune to X-Rays and Gamma radiation, making them ideal for critical applications U2 performs background pulse counting for UV tube health and therefore doesn't need a mechanical shutter system for self-checking Output: Flame Relay (Contact Output). Fault Relay (Contact Output) and 4-20 mA (Current Output)

U2-1010-PF Integrated Flame Detectors

Description:
Suitable for area classification – Class 1, Div 1, IIC, T6 Default cable length: 3 meters (extension cable and junction boxes available as separate accessories)



U2-1010 Integrated Flame Detectors

Description:
Suitable for area classification- Class 1, Div 2, IIC, T6, Default cable length: 3metres (extension cable and junction boxes available as separate accessories)



S55X SERIES Flame Detectors

Description:
S55xBE flame detector ensures flame discrimination in toughest environments and is capable to detect flame of almost every available fuel type or mixture. These Viewing Heads are suitable for Class 1, Div. 2 area classifications (approved by IECEx and CCoE). These are used in conjunction with P532, P531 or P522 Processors.



700 SERIES FLAME DETECTOR WITH PROCESSOR UNIT- S700/6 Flame Detectors

Description:
These compact Viewing Head detects the presence or absence of flame and features a quick disconnect plug with 2 embedded indicator LEDs. These viewing heads are used in conjunction with 700 Series Processor. Suitable for Class 1, Div 2 area classifications (approved by IECEx and CCoE).



700 Series Processor

Description:
The 700 is a signal processor which amplifies and conditions the Viewing Head signal for used with a burners management system. It provides a 0/4-20mA output signal, two SPDT flame relay outputs and one SPDT self-check relay output.



FLAME DETECTORS -C7027/35

Description:
Model C7027/35 is a compact flame detector used in flame safeguard controls and compatible flame amplifier.



FLAME DETECTORS -C7012

Description:
Model C7012 is a solid state electronic flame detector used with Honeywell flame safe guard controls and amplifier. Sense ultraviolet radiation produced by combustion of gas oil or other fuels. Weather proof & Ex proof versions also available.



FLAME DETECTORS -C7076

Description:
Model C7076 is a solid state dynamic self check adjustable sensitivity flame detector, used with compatible Honeywell flame safe guard controls and amplifier. This is recommended for off-process fuels such as H2S or flames that are difficult to detect eg Coal, BF, Producer Gas etc.



FLAME DETECTORS -C7915

Description:
Model C7915 includes a lead sulfide photocell that is sensitive to infrared radiations emitted by combustion of fuels, such as natural gas, oil and coal.



FLAME SWITCHES- R4343

Description:
Model R4343 performs flame detection function only. R4343D and R4343E are switches, when used with the appropriate sensors can signal the presence or absence of flame.



FLAME SWITCHES- R4348

Description:
Model R4348 is used for application in large commercial and industrial burner installation where they are used as simple flame switch. This can perform flame detection and burners safe start function. The potential free relay contacts enables the use of this with wide range of logic schemes as per customer needs. The add-on features include; flame intensity bar graph display and 4-20mA flame intensity output.



FLAME SWITCHES- EC/RM7823

Description:
Microprocessor-based integrated flame switch for detecting a flame using rectification, UV or IR source. Can be fitted with any 7800 series amplifier to provide relay action from 2 single pole double throw[SPDT] relays when flame is present or not present. This is a flame detection relay only, 3 LEDs to indicate power, flame and alarm.



FLAME SWITCHES- BC 1000

Description:
The BC 1000 series is a flame switch for intermittent operation to indicate presence or absence of a flame and to be applied in commercial or industrial burner installations. It can also be used as a primary control for manually operated burner systems using a start/stop station.



BURNER CONTROLLERS -EC/RM7800

Description:
The 7800 series burner control comprises a relay module, wiring subbase, purge timer and amplifier. Available options allow 7800 series installation to perform intelligent controls. Accessories Subbase Q7800A Key Board Display Module S7800A Flame Amplifiers R7847/R7848/R7886/R7861 Purge Timers ST7800A



BURNER CONTROLLERS -DBC 2000

Description:
DBC 2000 series microprocessors based controllers, are used to control and monitor gas and oil burners for on/off or modulating control. Two models are available: ""standard"" model and enhanced model with integrated valve proofing system as well as profibus or Modbus (future feature) communication possibilities. DBC 2000 is suitable for use with both, Flame Rod and UV flame detectors (C7027, C7035, C7044). It has an integrated flame amplifier. A jumper located at the back of the device controls the selection of flame Rod or UV Flame detector.



BURNER CONTROLLERS -TBC 1800

Description:
TBC1800 is a high-performance burner controller which is designed for pulse firing and modulating burner applications. TBC1C00 has capacity of providing fast on/off or low/high firing. Features Flame Valve digital display Fault display o front plate Remote reset Simple setting of flame threshold (applicable incase of UV detectors are user for flame detection).



Further ignition and monitoring components

SPARK IGNITION MODULE -S87

Description:
Compact flame switches with built in spark generator (ignition transformer). Used with ionization rods/unirod. Operates on a 24 Vac power supply. Switches on valve ignites spark, reattempts ignition in case of flame failure. Optional 30 seconds, Pre purging time. Typically suitable for smaller batch type furnace, Ovens, Powder coating and surface treatment ovens, Cost effective

IGNITION TRANSFORMERS -ZT 871/900/930/932

Description:
Ignition transformers for oil and gas burner ignition

IGNITION TRANSFORMERS -ET401/2

Description:
ET401 has single high voltage output pin connection, suitable for use with gas burners ET402 has double high voltage output pin connections, suitable for use with gas, oil and dual fuel burners.