GAS LEAK DETECTORS

SENSEPOINT XCD

All-In-One Gas Monitoring Solution
Flammable (catalytic or infrared), toxic and oxygen versions available
Serves new/retrofit, indoor/outdoor applications
Stainless steel or aluminium explosion-proof housing options
IP66 as standard
Applications
Surecell™ electrochemical sensors
Poison immune infrared sensors
Poison resistant catalytic bead sensors
Long life sensors

SENSEPOINT XCD RFD

Sensepoint XCD RFD is your most flexible, practical choice for remote flammable gas monitoring in Class I Division 1 areas.
Applications
Compatible with high temperature sensors for use in and around Gas Turbine
Enclosures and solvent based printing and coating drying ovens
Compliant with the requirements of HSE guidance note PM84
Transmitter can be mounted in easy to access area even if sensor is in a hard to access or restricted access area
Sensor can be mounted up to 30 metres (100 feet) from transmitter
Standard temperature catalytic and infrared sensor types also available.

HONEYWELL SENSEPOINT XCD RTD

Remotely monitor Toxic Gases in Class 1, Div 2 areas while reducing the maintenance, training and overall cost of gas monitoring.
Gain Added Flexibility, Reliability and Performance
Extend gas sensing element up to 100 feet (30 meters) from transmitter; mount in the most difficult to access areas Reduce likelihood of human error via on-board diagnostics and easy-to-read display
Protect against dust/ water ingress with IP66/67 rated stainless steel or aluminum enclosure
Prevent false alarms with auto-inhibit during maintenance
Select sink or source 4-20mA output; integral or remote configuration
Full range of accessories and purchase options let you choose the remote monitoring system that's right for your application
Applications
Industrial manufacturing facilities, Power plants, Waste water facilities, Utilities, Food and beverage production, Refineries and chemical plants, Onshore oil and gas terminals, Production platforms, Exploration and drilling.

Sensepoint XRL

Thanks to Honeywell’s use of Bluetooth Low Energy (BLE) technology, you can install, commission and maintain your Sense point XRL gas detector — all from the palm of your hand. Simply pair the detector with your smartphone; then use Honeywell’s Sense point gas detector app to wirelessly perform many tasks — from adjusting set points to checking fault codes — from up to 10 meters away. Sense point XRL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in industrial facilities.
Features & Benefits
• Manage installation, commissioning and maintenance from the gas detector app on your smartphone or tablet
• Award-winning design
• Robust aluminium housing
• Worldwide hazardous area approvals
• Compatible with Touchpoint Plus and other industry-standard controllers Quick Specs
• mA loop or Modbus RTU output
• Multi-colour LED status indicator
• Operating temperature range -40°C to +65°C, IP66, Type 4X
• Choice of toxic, Oxygen or flammable sensors

Sensepoint XCL

Sense point XCL is a fixed gas detector that delivers the safety and compliance you expect — plus the affordability and ease of use that you don’t. It was designed especially for commercial and light industrial applications, delivering just the right amount of functionality to protect people on your premises and ensure compliance with regulations. Sense point XCL combines a simple yet robust mechanical housing with a gas detector app, so you can use everyday technology to set up and maintain your gas detector — and quickly get back to business. Sense point XCL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in commercial premises.
Features & Benefits
• Manage installation, commissioning and maintenance from the gas detector app on your smartphone
• Aesthetic design blends in to the environment
• Simple, robust housing with our easiest ever installation and maintenance
• Integral gassing port for hard-to-reach locations
• Compatible with Touchpoint Plus and other industry-standard controllers Quick Specs
• mA loop or Modbus RTU output with optional relays
• Multi-colour LED status indicator
• Operating temperature −20 to 50°C, ingress protection IP65
• Choice of toxic, oxygen or flammable sensors

GAS DETECTORS

Wherever toxic or combustible gases are part of an industrial process or a by-product of it, they pose a threat to people, property and productivity. Honeywell Analytics offers a complete line of rugged, reliable, fixed-point gas detectors to serve as your first line of defense against gas threats.
The Industrial line incorporates the full spectrum of Honeywell gas sensing technologies (electrochemical, catalytic bead, open-path and point Infrared), offering the safety manager a ""one-stop"" solution for choosing a compatible gas detection system or integrated fire/gas system. Whether your need is to monitor gas hazards in a large area or several discrete locations from a convenient central site, Honeywell Analytics has a solution. Applications include oil and gas, petrochemicals, specialty chemicals, industrial refrigeration, water and wastewater treatment, plastics and fibers, pulp and printing, agriculture, manufacturing and other industrial processes.

FIXED GAS DETECTORS

Our range of fixed gas detection equipment features a variety of options suited to all types of application and industries.

XNX UNIVERSAL TRANSMITTER

XNX is a universal transmitter for toxic, oxygen and combustible gas detection compatible with all Honeywell gas sensing technologies.
XNX ADVANTAGES
Flammable gas detection 0 to 100% LFL/LEL
IR cell provides CO2 and combustible gas monitoring
Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
Quick calibration with auto-inhibit
NEMA 4X IP66 rated for rugged indoor/outdoor use
Minimal training required
One-man operation
Plug-in sensor replacement
All necessary accessories included

XNX UNIVERSAL GAS SENSING AND COMMUNICATIONS PLATFORM

Electrochemical
Proven electrochemical sensing technology, Surecell™ electrochemical cells are ideal for hot and humid environments
Long life sensing cells (typical >2 years)
Patented 'Reflex' sensing element verification diagnostics
Sensor recognition software auto configures transmitter, Plug and play factory configured sensors, Intrinsically safe sensor connection permits hot swap, reducing down time
Catalytic Bead, Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
Fast response to wide range of hydrocarbons and flammables
Infrared (Open Path IR, Point IR, IR Cell)
Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
Failsafe operation, Fast speed of response, Reduced routine maintenance
Immune to catalytic poisons, Long operating life, Works in inert atmospheres
Flexible Communications, Standard, Backlit, easy to use display, available in 8 languages
HART provides cost-effective digital data feed over 4-20mA
Optional, HART handheld calibration device offers intrinsically safe operation
Modbus® simplifies wiring scheme by reducing ""home runs""
Foundation® Fieldbus adds advanced diagnostics
Up to 3 relays provide alarm and fault indication, and remote calibration

SERIES 3000 MKII TRANSMITTER WITH SENSOR

Toxic, 2 wire loop powered 4-20mA gas transmitter with integral gas concentration display. The Series 3000 MkII provides comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres, both in and out of doors.
Reliable Detection
Proven electrochemical sensing technology
Uses SurecellTM electrochemical cells, ideal for hot and humid environments
Long life sensing elements (typical > 2 years)
Patented 'Reflex' sensing element verification diagnostics
Regulatory Compliance
European (ATEX)
US (UL)
Canadian (c-UL)
International (IECEx)

SENSEPOINT HIGH TEMPERATURE SENSOR

Ideal for combustible gases in high temperature areas
UL certified, explosion-proof flammable gas detectors
Excellent Performance
Certified for hazardous location operation up to +150°C (+302°F)
Alarm trip points as low as 5% LEL
Fast speed of response
Poison resistant detectors
Low power consumption
Cost Effective
Low cost disposable sensor
Greater than 5 year typical operating life
Reliable Operation
Specially matched 'Sieger' detectors provide highest stability
Proven technology from the World leader in combustible gas detection
Flexibility
Measuring ranges from 0-20% LEL to 0-100% LEL
Wide range of accessories
Robust Construction
UL approved explosion proof enclosure
High grade Aluminum construction

SEARCHPOINT OPTIMA PLUS INCLUDING HART® POINT INFRARED GAS DETECTOR

Take advantage of HART communication added to the proven performance of the market-leading hydrocarbon point infrared gas detector
Experience gained from over 100,000 units installed worldwide
Improved reliability
Optional HART® over 4-20mA output
Can detect a wide range of hydrocarbon gases including solvents
Increased reliability with no moving parts
Increased stability from self compensating optics
Immune to long term component drift
Remote functional gas test facility
Certified for North American and European Hazardous areas
Increased false alarm rejection
Increased uptime with contaminated optics warning
Dynamic Heating Control ensures condensation free optics
No undetected failures
Improved diagnostics
Integral event logging
Reduced power consumption
Certified to many hazardous area classification schemes including: UL, CSA, ATEX, IECEx and more

SEARCHLINE EXCEL OPEN PATH INFRARED GAS DETECTOR

World renowned infrared open path flammable gas detector offering unrivalled performance and sensitivity.
Why open path gas detection?
Open path detectors complement the use of individual point detectors and offer many significant benefits including:
Wider area coverage - most likely to pick up any leak
Very high speed of response
NO unrevealed failure modes - no possibility of blocked gas path to detector
Detector location not as critical
Indicates size of hazard

VOC detector

RAEGuard 2 PID

"RAEGuard 2 PID is a fixed photoionisation detector (PID) that measures a broad range of volatile organic compounds (VOCs)
Features & Benefits
Faster response time - Thanks to the sample flow-through design
Reduce maintenance cost - Easy to remove sensor module in hazardous locations without using of tools
No false alarms - Large UV lamp and better sealing allows greater sensitivity, faster speed of response and better resolution"

CONTROLLERS

Unipoint Controller

Our selection of controllers offers flexibility and a modular approach that allows you to meet the individual requirements for your specific site.DIN rail mounted controller offering a flexible and low cost solution to incorporate flammable, toxic or Oxygen gas detection into control systems.
User Friendly, Ultra-clear backlit display, System status codes, Built-in audiovisual alarms
Intuitive menu system
Simple pushbutton operation
Remote accept, reset and inhibit inputs
Easy to Install
TS35 ('top hat') DIN rail mounting
Removable terminal connectors
Easy access to all terminals
Additional units clip together
Comprehensive Operation
3 wire mV bridge, 2 and 3 wire 4-20mA inputs
DC operation
3 x alarm relays
1 x system fault relay
Field inhibit input (mA versions)
Flexible Operation
Fully user programmable scale, units and calibration
Relays configurable as energized, de-energized, latching or non-latching, alarm relay on/off delay
Compatible with a wide range of gas detectors"

Touchpoint Plus Controller

Touchpoint Plus brings a whole new control experience to your small system of gas detectors. Touchpoint Plus is an easily configurable, wall-mounted control system that supports up to 16 gas detection channels.
Its modular approach enables you to take control and configure what you need for a wide range of applications.
Delivering Reliable Control
• Honeywell reliability from the most trusted experts in gas detection
• Built-in battery backup for constant uptime
• Robust, shockproof housing for a wide range of industrial environments Flexible Capabilities
• Compatible with the full range of Honeywell gas detectors
• Powered audiovisual alarms simplify field installation
• Configuration includes easy grouping and voting alarm logic without specialist knowledge
• Next-generation compatibility
• Optional Modbus output for integration with a higher level system Providing Ease and Efficiency
• Quick and easy installation, configuration, setup, and maintenance
• Easy diagnostics, data, and reporting
• Minimum training time
• Large color touchscreen LCD
• Multilingual functionality
• Green-yellow-red status

TOUCHPOINT PRO

Honeywell’s Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Intuitive and flexible, Touchpoint Pro offers optimum compliance, safety and productivity for sites.
Features & Benefits
1. Webserver ensures 24/7 system status visibility for constant safety
2. Flexible system architecture to meet specific site needs
3. Easily accessible system status that can be seen at a glance

Quick Specs
1. Up to 64 channels of detection and 128 output channels
2. Digital and analogue inputs available
3. Mulitple mounting possibilities
4. Touchscreen user interface

GAS DIGIGUARD

"The GAS DIGIGUARD is a multi-channel 19” Rack mounted Controller system that monitors the levels of up to sixteen remotely mounted Gas Sensors. The instrument is a standalone system that can be operated independently, or can also be connected to a PLC or DCS through a RS485 communication port on Modbus RTU protocol. This advanced multi-microcontroller based system is compatible with all the Gas Sensors from Honeywell Life Safety and can provide audio/visual alarms when the set values are exceeded.
APPLICATIONS
OIL & GAS, Petrochemical, Onshore Operations Offshore Operations, INDUSTRIAL, Chemical, Water Treatment Semi conductor Paper & Pulp, COMMERCIAL, Building Services Car Parks, Boiler Houses Food, Printing,

PORTABLE GAS DETECTION

SINGLE GAS DETECTOR- Gas Alert Clip Extreme

Up to three years of continuous maintenance-free protection. As the world's most popular and widely used zero-maintenance gas detector, the GasAlertClip Extreme offers continuous, reliable protection. Available in two year or three year versions, this single gas detector requires no calibration, sensor replacement, battery replacement, or battery charging. Compatible with the MicroDock II automatic test system, the simplicity of the GasAlertClip Extreme combined with minimal training requirements and negligible maintenance costs, make the GasAlertClip Extreme one of the most cost-effective PPE solutions for facility workers and on-site contractors.
H2S, SO2, CO or O2
Durable, reliable and easy to use with no downtime
Record keeping is accurate and easy with automatic event logging
Exceptionally low cost of ownership
Compatible with BW Technologies by Honeywell's MicroDock II automatic test station
Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms
Bright wide-angled visual alarm bars
Built-in concussion-proof boot
Water-resistant

MULTI GAS DETECTOR -Gas Alert Micro Clip X3/XL

"The Gas Alert Micro Clip X3/XL provides affordable protection from atmospheric hazards. Its slim and compact design makes it easy to wear, allowing workers to focus on the job at hand without feeling weighed down. With easy one-button operation, workers make fewer operational errors and training time is reduced. The GasAlertMicroClip X3/XL uses and easy-to-navigate interface common to previous generation gas monitors from BW technologies. This multi-gas monitor provides continuous visual confirmation of detector operation and compliance with the IntelliFlash™ feature. The Gas Alert Micro Clip X3/XL is fully compatible with BW Technologies by Honeywell MicroDock II automatic test and calibration system.
H2S, CO, O2 and LEL
Incredibly thin and lightweight, making it comfortable to wear
Multi-gas versatility with one-button simplicity
Continuous visual compliance with IntelliFlash
Extraordinarily low cost of ownership
Easy to test with MicroDock II compatibility

Gas Alert Micro 5 -Multi-gas Made Easy

Providing protection from up to five potential atmospheric hazards including oxygen, combustible and toxic gases, GasAlertMicro 5 is unparalleled in its versatility, capability and overall value. BW Technologies by Honeywell's newest addition to its water-resistant line of portable gas detectors has transformed the market with its matchless array of features.
Continuously monitoring and displaying concentrations of up to five gases, the compact and lightweight GasAlertMicro 5 was designed and engineered with an extensive host of applications in mind.
Features
H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, C12, C102, O3, and combustibles gases.
Integral concussion-proof boot
Optional integral motorized pump option for remote sampling
Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
Triple alarms (audible, visual and vibrating)
Multi-language support in English, French, German, Spanish and Portuguese
Large, user selectable backlit LCD
Four alarm levels: Low, High, TWA and STEL
Compatible with MicroDock II Automatic Test and Calibration Station
Datalogging models store and recall event information
Wide range of user selectable field options including password protection, safe and stealth modes.
Self Tests
Full function self-test confirms sensor, battery and circuitry integrity and audible/visual alarms on activation

Gas Alert Micro 5 PID

VOCs (PID), H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3, and Combustibles gases.
Smaller and over 50% lighter than competitive instruments
Water-resistant design in an integral concussion-proof enclosure
Continuous LCD shows simultaneous gas concentrations for five gases
0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
Integral motorized pump option for remote sampling
Two power options: AA alkaline or rechargeable hot-swappable battery pack
Provides 95 dB alarm tone and two bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Multi-language support in English, French, German, Spanish, and Portuguese
Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
Simple automatic calibration procedure; compatible with BW Technologies by Honeywell MicroDock II automatic test and calibration station
Records TWA, STEL, and maximum exposures to gas and displays readings on command
User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

Gas Alert Micro 5 IR

Gas Alert Micro 5 IR portable gas detector simultaneously monitors up to five atmospheric hazards including carbon dioxide (CO2), oxygen (O2), combustible gas (%LEL), and a wide selection of toxic gases. Compact and lightweight, GasAlertMicro 5 IR activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition.
Features
0-5% vol (0-50,000 ppm) measurement of carbon dioxide
Integral concussion-proof enclosure for the most rugged environments
Continuous LCD shows simultaneous gas concentrations for up to five gases
Two power options: three AA alkaline batteries or a rechargeable battery pack
Simple automatic calibration procedure; compatible with BW Technologies by Honeywell's MicroDock II system
Provides 95 dB alarm tone, two bright wide-angled alarm bars and internal vibrating alarm for high noise areas
Multi-language support in English, French, German, Spanish and Portuguese
Full function self-test of sensor, battery and circuit integrity, and audible/visual alarms
Two year warranty including sensors(1 year NH3)
Packaging Contents:
Standard Versions: Complete with monitor and sensors (as specified), sensor compartment cover for diffusion operation, calibration adaptor and hose, quick reference guide and technical documentation CD, integral concussion-proof boot, and three AA alkaline batteries.
Confined Space Kits: Includes standard version contents plus foam lined carrying case for instrument and accessories, 34 L cylinder(s) of calibration gas required for sensors installed, 0.5 LPM/1.0 LPM calibration regulator (male) and tubing.

RAE PORTABLE SERIES

MultiRAE Lite

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and eatures the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.
The MultiRAE Lite’s optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response. Personal protection and multi-gas leak detection in industries such as:
- Chemical
- Food and beverage
- Oil and gas (downstream)
- Pharmaceutical
- Telecommunications
- Wastewater treatment
• Fire overhaul
• Available in pumped and diffusion versions
• Highly versatile and customizable
• Man Down Alarm with real-time remote wireless notification
• Easy maintenance with replaceable sensors, pump, and plug-and-play battery
• Fully automatic bump testing and calibration with AutoRAE 2

QRAE 3

QRAE 3 is a wireless compact monitor for one to four gases. The QRAE 3 provides detection and monitoring of Oxygen (O2), Combustibles, and toxic gases that include Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Sulfur Dioxide (SO2) and Hydrogen Cyanide (HCN). QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time.
• Man Down Alarm with real-time remote wireless notification 1
• Easy maintenance with fieldreplaceable sensors and pump
• Fully automated bump testing and calibration with AutoRAE 2
• Pumped or diffusion models available
• Large graphic display can rotate 180º Applications

Confined space entry and general safety and compliance in:
• Industrial safety
• Oil and gas
• Fireground “Toxic Twins” detection
• Environmental
• Fire and Emergency response QRAE 3 Wireless 4-Gas Monitor Optional Accessories
• AutoRAE 2 Automatic Test and Calibration System
• External battery charger

HI-TECH GAS DETECTION

Midas® Gas Detector

For semiconductor fabs, photovoltaics manufacturing, laboratories and other applications such as foaming facilities and aerospace where low levels (ppb) of toxic and flammable gas need to be detected.
The Midas® Gas Detector detects more than 35 gases — easily, quickly and error-free. All with extended sensor calibration periods, patented diagnostics and lower cost of ownership.
Smart sensor cartridge with on board 'e-calibration' certificate, 3 built in relays for Alarm 1, 2 and Fault, Power over Ethernet (PoE) communication, Keypad interface and remote web browser interface, Optional Midas Pyrolyzer module that connects to any Midas Gas Detector, Password protected menu levels to preserve system integrity Bright LEDs and intuitive icon driven, large multicolor backlit LCD display, Factory-calibrated sensors to reduce need for frequent gas testing, Isolated 0-22 mA analog output with fault and event reporting Modbus/TCP Ethernet for easy connectivity to all control and alarm systems ports for control connectivity and service interaction, Robust extractive pump system (2 year lifetime) sampling up to 100 feet, CE marked for total immunity to Radio Frequency Interference, Reflex® sensor health check for improved safety, TempraSureTM temperature compensation technology as appropriate, Event logging to review sensor history.

Chemcassette® Toxic Gas Detection

Chemcassette® is the unique trademarked name for a calibration free toxic gas detection method that uses an optical scanning system to detect the presence of gas by a colour change on the specially chemically impregnated paper tape. Chemcassette® technology is highly specific and reacts extremely fast to the presence of parts per billion (ppb) levels of many hazardous gases. Over 200,000 points of gas detection are currently maintained by the Chemcassette® sensing technology at any given time around the World in some of the most critical safety applications possible.
Each Chemcassette® is manufactured to traceable ISO 9000 manufacturing standards by a world class team of highly trained chemists and each batch is calibrated with ultra pure gas that is traceable to nationally accepted standards. This means that the end user does not have to provide calibration facilities themselves thereby saving cost and reducing risks to their own staff.
Efficient high volume manufacturing techniques means that there is always available Chemcassette® in stock that can be shipped anywhere in the World so that our customers are never left without adequate safety cover. Application support with expert gas detection chemists is available by phone and e-mail and is supported with many years of technical application notes and help to diagnose common support issues.
Should there be any concern regarding the performance of an individual Chemcassette®, a free of charge evaluation will be performed to trouble shoot the observed scenario using the award winning quality management system ""Customer Discrepancy Report"" CDR. Every CDR completed by a customer is guaranteed a full response and the outcome is reported directly back to the end user to ensure a complete resolution process.
Each Chemcassette® is backed with a full warranty and we have over 20 years of experience regarding the quality control of our proven sensing technology.

Satellite XT Transmitter with Sensor

Toxic detector with a wide range of sensors available. The Satellite XT is the simple solution for all ""Point-of-Use"" gas detection needs. Based upon the market's smallest and most reliable electrochemical cell technology, the Satellite XT offers flexibility, simplicity and ease of application. The Satellite XT can be purchased in either an analogue or digital configuration, allowing it to interface with new or existing facility control technologies.
Applications
Provides gas detection for
Gas cabinets
Valve manifold box
Equipment enclosure
Ambient breathing zone
Gas storage rooms
OEM equipment
Applications
Fast, reliable, specific gas detection
Continuous real–time monitoring
Interchangeable intelligent sensor cell
No dynamic gas calibration required
Generic sensor head electronics
Low cost of ownership
No moving parts to wear down or replace

SPM Flex

Improve safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics
Features & Benefits
Visible at a distance with crisp, colorful LED bar on top of unit with flip screen
Remote viewing through the web
Stands up to harsh conditions
Duty cycle and k-factor multiplier options
Quick Specs
Weight: 9.1 lbs.
No ChemKeysTM required
Intuitive LCD menu

CM4 Toxic Gas Monitor

Continuous monitoring of toxic gases on 4 points using Chemcasstte®.
Features & Benefits
Total surveillance at all times
Easy installation into virtually all annunciation and shutdown systems
Physical evidence of events

Quick Specs
Chemcassette® Technology
Analog and Serial Outputs
300' (90m) Sampling Distance
LonWorks® Interface Available

Colorimetric Gas Detection Tubes

For quick, on-the-spot, compound-specific measurement of a wide range of toxic and combustible gases and vapors.
Features & Benefits
Quick, accurate, low-cost measurements
Solid metal construction with lifetime warranty
No calibration or other maintenance required

Quick Specs
Wide assortment of tubes available to detect over 300 gases and vapors
Easy-to-read with sharp, clear color change
Springless piston design accurately draws

RESIDENTIAL GAS DETECTION

IAQ Point2

Put money in your pocket and fresh air comfort in your building by using demand-controlled ventilation and triple monitoring.
Features & Benefits
Monitor CO2 or VOCs, temperature and humidity
Menu-driven, customizable, easy-to-navigate display
Green attributes such as obtaining LEED credits
Quick Specs
Response time: T90 < 60 seconds
Calibration: None required
Dimensions: 3.0 (w) x 4.6 (h) x 1.5 (d) in. (11.8 x 7.7 x 3.7 cm)

H450EN Self-contained Carbon Monoxide Alarm

6 year guarantee, up to 7 year life of alarm
Superior electrochemical cell sensing technology
Easy to install & use
Automatic sensor adjustment function ensures complete accuracy
Approved to EN50291-1:2010 & kitemarked
Continuous self test function
Batteries supplied & pre-fitted in alarm
No sensors to replace
No mains power
No maintenance

SF340 Series Hard Wired Carbon Monoxide Alarms

Why choose the SF340 Series

Unique 5 year module replacement system
Up to 5 years battery back up
Low maintenance & low cost of ownership
Secure installation
230 Vac & 12/24 Vdc options
Easy integration within existing systems
Interconnect and relay output options
Every alarm is tested and calibrated in Carbon Monoxide
No re-wiring or main unit replacement costs

HF500 Hard-Wired Flammable Gas Alarms

Why Choose the HF500?

High Reliability
Approved to EN50194-1:2009 by BSI (Kitemarked KM 590203)
Catalytic flammable gas sensor
Professional design
Tamper Proof
Hard-wired for peace of mind
Easy to operate and use by the end-user
Clearly visible status indication LEDs: power, alarm, fault
Loud 85dB alarm
Button for test and alarm mute
Low total cost of ownership
Optimised for easy wiring
Direct connection to a solenoid valve
5 year product life with 2 year guarantee
Easy to Install
Easy to access wiring terminal
Cable entry from the back or via mini trunking from the sides or bottom
Fits to standard electrical installation boxes
The design allows the alarm to be replaced without rewiring
Installer mode to test the functionality of the relays
Designed for Residential Environments
Small, compact design with stylish look, optimized for residential settings
Complete Solution

Integrated alarm relay can operate normally open and normally closed solenoid valves for automatic gas shut off Alarm and fault relays can also be used to connect to a control panel/alarm system Honeywell also offers a range of suitable solenoid valve.